Backpack Protection Insert — User Guide
Model AUS-HG2-BP01 · AU SUPERIOR INC · Palo Alto, CA, USA
1. What this is
A removable soft protection insert for everyday backpacks. It goes into the laptop compartment or against the back panel of a bag you already own. The bag is sold separately.
- Size: 10 × 14⅜ in (25.5 × 36.5 cm)
- Weight and thickness: published with the first production batch
- Materials: Core: UHMWPE · Cover: Polyester
2. How to place it
- Find the label. The side with the label is the BODY SIDE.
- Slide the insert into the laptop compartment or against the back panel.
- Keep the BODY SIDE toward your back, with the arched edge at the top.
- Check that the insert lies flat and the bag closes normally.
You can take it out in seconds whenever you want to carry the bag on its own.
3. Will it fit
Measure the inside of your laptop compartment or back panel before you order, and allow a little room around the insert. It is designed for 13–16 inch laptop backpacks. A fit chart is published with the first production batch.
4. Care and storage
- Wipe clean only. Do not wash, dry or iron.
- Store flat in a cool, dry place, away from direct sunlight and heat sources.
- Keep away from solvents and sharp edges.
- Check the insert from time to time for cuts, tears, deep creases, swelling, or a cover that has come apart.
5. Warnings and limits
- Do not use if damaged.
- No armor stops all threats.
- Not for rifle rounds or blades.
- Protects only the area it covers.
- This is a backpack insert. It is not body armor to be worn, and it does not replace safe behavior or following instructions from authorities in an emergency.
- Replace the insert after any impact, even if the damage looks small.
6. What has been tested
Here is exactly what our testing covers.
- Material-level testing: Element U.S. Space & Defense (Belcamp, MD), Test Report PH00019051, Rev. 0, issued 5 June 2026 (tested 26 May 2026). Standards and procedures listed in the report: NIJ 0101.07 HG2, MIL-STD-662F, customer request. V50 ballistic limit, ambient conditions, flat material panels. Rounds used: 9 mm 124-grain FMJ and .44 Magnum 240-grain SJHP.
- Finished-product testing: in progress. Results will be posted here.
- This product is not NIJ certified, not NIJ listed, and not on the NIJ Compliant Products List. The NIJ program covers law-enforcement torso body armor; backpack inserts are outside its scope.
- Material test results describe the material. They do not represent the performance of a finished insert.
7. Reading your label
- LOT / MFG (MMYY) / QC — for example AA - 1126 - 01: production lot AA, made November 2026, inspector code 01.
- SN — the serial number of your insert, for example 100-001.
Keep the label readable. We use it to confirm your model and lot for support and warranty.
8. Limited warranty
5-year limited warranty. Full warranty terms will be posted on this page before the first orders ship.
9. Contact
hi@ausuperior.com · AU SUPERIOR INC · Palo Alto, CA, USA
We support customers in the United States.